钢圈清洗剂
Steelrim cleaning agent
I. Brief introduction of the product:
This product has special effects on removing greasy dirt, metal oxide, carbon deposition and brake powder on the stainless steel and the alloy hub and is able to polish and renovate the yellow or black steel rims that are not cleaned up for several years. It is the necessary agent for vehicle cleaning, without damages to hubs and tires. Use it safely.
II. Instructions:
1. The steel rim cleaning agent is poured into the sprinkling can mixing with water according to 1:5 and use the solution after the hub temperature has lowered to the ambient temperature
2. Clean up by using the water blast gun.
III. Notes:
1. Direct spraying of the steel rim cleaning agent to the high-temperature painted hub is forbidden in order to avoid discoloration.
2. The cladding layer of several modified hub is not qualified, and therefore, test is needed within small area to ensure safe construction.
3. After removing the hub marks on the paint surface, timely clean and polish.
4. Once it enters into eyes suddenly, wash it with much water immediately; if there is any discomfort, see the doctor immediately.
5. Wear rubber gloves during construction.
6. Keep away from Children.
IV. Physical characteristics
Density:1.11
PH: Above 1
Antifreeze point: -17℃
Appearance: Pink
V. Anti-rust test
(80℃15h30min) Copper is 2b, iron, steel, aluminum block, galvanized sheet and aluminum sheet all become black.