通用型油性陶瓷抗磨添加剂
Universal oily ceramic anti-wear additive
I. Use effect
1. Used for axle box, reducer and motor of each pump
〈1〉 The operating temperature of bearing and bearing bush reduces by about 5℃
〈2〉 Save more than 7-15 power consumption
〈3〉 Extend the service life of plunger and radical axis to be more than 2-3 times.
〈4〉 The sealing greatly improves.
〈5〉 Save about 50% of replacement cost and overhaul cost of equipment parts.
〈7〉 The friction coefficient decreases almost near to 0, which can effectively reduce wear and extend the service life of crankshaft to be more than 1 time
2. Used for main engine, steering engine, anchor machine, auxiliary engine and air compressor of ship engine.
〈1〉 The overall noise obviously declines to 2-5 decibels.
〈2〉 Generally, the oil saving ratio is about 8%, and oil change period extends 2-5 times
〈3〉 Acceleration and dynamic property are obviously improved by about 5%
〈4〉 Reduce 2 times of machinery failure rate, and extend more than 3 times of service life of machine.
〈5〉 Extend more than 2 times of maintenance period, and save 50% of overhaul cost.
3. Used for air compressor, oil pump and all mechanical equipment in the power industry
〈1〉 Reduce the noise by 2-5 dB
〈2〉 New machine is no need to running-in
〈3〉 Save about 10% of power consumption
〈4〉 Extend more than 2 times of oil change period
〈5〉 Machinery failure rate reduces
4. Used for engineering machinery;
〈1〉 The noise of finished vehicle declines 2-5 decibels
〈2〉 Power is improved by about 10%
〈3〉 Oil consumption (g/kwh) reduces about 10%
〈4〉 The engine oil change period extends 3 times
〈5〉 Effectively prevent bore sweeping of engine oil pump
〈6〉 Restrain about 10% of temperature rise of engine
〈7〉 The transmission speed of gearbox, differential mechanism and steering engine improves, and the friction coefficient approaches to 0.
〈8〉 The tail gas emission reduces, and the smoke intensity value reduces about 50%
〈9〉 Reduce machinery failure rate, extend maintenance period, and extend more than 3 times of service life of each lubricating part
5. Used for vehicle engine, gearbox, differential mechanism and transfer case new vehicle:
〈1〉 The dynamic property obviously increases and the noise of finished vehicle obviously declines to about 2db.
〈2〉 Generally, the oil saving rate can reach to about 5%
〈3〉 Extend the oil change period
〈4〉 The dynamic property of finished vehicle obviously increases, fuel economy and tail gas emission are completely improved, and idling emission declines by about 25%
〈5〉 The machinery failure rate declines and warranty period extend for one time
〈6〉 Improve the coordination of finished vehicle, no running-in and no speed limit, and effectively prevent cylinder scuffing and bearing burning
〈7〉 The finished vehicle can realize non-declining of dynamic curve, which slightly raises, the average oil consumption declines about 5% than the original technical level, and the tail gas pollutant emission declines based on the original machine, and it is expected to rise from Euro Ⅱ to Euro Ⅲ standard.
6. Used for the internal combustion engine, gearbox and axle head of bearing
〈1〉 Restrain 5-10℃ temperature rise
〈2〉 Reduce the noise by 2-5 dB
〈3〉 Improve more than 10% of power
〈4〉 Save about 10% of fuel, and extend 2-3 times of engine oil change period
〈5〉 Anti-friction and anti-wear, extend more than 2 times of service life of equipment, and reduce the equipment failure rate
〈6〉 Reduce more than 50% of black smoke emission
〈7〉 Extend the overhaul period of equipment, and save more than 50% of overhaul expense
7. Used for motor of precision machine tool, gearbox, work feeder, polished rod of conveying device and screw rod
〈1〉 Save more than 5% of electricity and 10% of fuel
〈2〉 Reduce about 5 decibels of mechanical noise
〈3〉 Completely handle the creeping of guide rail machine tool, and improve processing precision
〈4〉 Control the temperature rise of mechanical equipment to be about 10 degrees
〈5〉 The engine oil change period extends 3 times
〈6〉 Improve work efficiency
II. Physical indicators:
1. Appearance: yellow and transparent
2. PH=9-7
3. Density 1.09
4. Flashpoint: Open at 220℃
5. Pour point:-26℃
III. Use ratio: 4%-5%