水性铸铝脱模剂
Water-based aluminum mold release agent
I. Product introduction:
This product, a type of opalescent spraying material, is applicable to the forging and demolding of metals such as aluminum, copper, iron and stainless steel, and requires a smooth casting surface.
II. Main function:
1. Prevent premature solidification of medals.
2. Control the setting time of improved casting and direction ratio.
3. Reduce the thermal shock to the mold.
4. Prevent sticky mold.
III. Key advantages:
1. Optimal lubricity.
2. Excellent heat-insulating performance.
3. Excellent demolding performance.
4. Ultrafine (1 micro).
IV. Main usage:
Used for the demolding of forging aluminum, copper and stainless steel.
V. Method of use:
Additive: Water =1: 50-100, firstly dilute, and then spray to the casting mold.
VI. Physical and chemical indicators
Formula | Appearance | Density : | PH | Flash Point | Surface Preparation | Use ratio |
I | white fluid | 1 | 7-8 | None. | Needed | 1: 50-100 |
II | white fluid | 1.09 | 7-8 | None. | Needed | 1: 50-100 |
III | white fluid | 1.01 | 6-7 | None. | Needed | 1: 30-50 |
IV | white fluid | 0.92 | 7-8 | None. | No need | 1: 50-100 |
V | white fluid | 1.3 | 9-10 | None. | No need | Direct use |