环氧玻璃钢材料脱模剂
Epoxy FRP release agent
I. Product usage
The product mainly applies to polyester separating or demolding of epoxy resin and various molds
II. Performance features
A layer of effective protection and separation film between product and mold so as to reduce the direct contact and friction between material and mold
1. Good dispersibility, easy to spray
2. Safety operation and no toxicity; Even and smooth, good film-forming property
3. Excellent demolding and isolation effect, have no corrosion and no scaling for mold
3. Have no effect on the resin curing, low adhesive force on resin
4. Good weather resistance, and stable storage property
5. Not affect the adhesiveness and paint-bearing force of product, and not pollute mold
III. Physical and chemical indicators
Formula | Appearance | Density | PH | Pour point | Flash point | Use ratio |
I | Opalescent fluid | 1.01 | 6-7 | 0℃ | None | 1:30-50 |
II | Colorless liquid | 1.11 | Approximately 9 | 0℃ | None. | 1:3-7 |
IV. Method of use:
1. Clean the template before painting.
2. Spray the product on the mold with spray gun or brush after evenly stirring.
3. If the new mold needs to be coated with two layers, recoat the second layer after the first layer fully dries. The thickness of dry film is at least 0.15-0.25mm (equivalent to the thickness of one layer of industrial garbage bag), and the durable film shall be 0.08-0.15mm.