切削液烟雾抑制添加剂(水性)
Cutting Liquid Smog Restrain Additive(water-based)
I. Product descriptions
Some large plants will generate a mass of smog in the cutting process and cause air pollution, which will seriously influence the human lung function after inhalation, and the smog falls on the ground of workshop to form water stain, and the staff is easier to slip and hurt, the cutting liquid smog inhibitor destroys the principle of smog forming gradually so as to effectively restrain the generation of smog.
II. Product performance
1. Increasing boiling points;
2. Improve the cohesion (surface tension) of cutting liquid;
3. Apply to all the water-based cutting liquid
4. Restrain the generation of water mist in the cutting process through the above principle
III. Method of use
Directly add into the blended cutting liquid
IV. Physical and chemical indicators
Density:1.10
PH value:9-10
Boiling point: Add 10%, test boiling point to be 104 degrees; Add 5%, test boiling point to be 101 degrees;
Flashpoint: None.
Pour point -32℃
Color: Colorless and transparent
V. Use ratio
3%-8%(adjust the use ratio as appropriate)