切削油烟雾抑制添加剂(油性)
Cutting Oil Mist Restrain Additive (oil-based)
I. Product descriptions
Some large plants will generate a mass of oil mist in the cutting process and cause air pollution, which will seriously influence the human lung function after inhalation, and the oil mist falls on the ground of workshop to form water stain, and the staff is easier to slip and hurt, and the cutting oil mist inhibitor destroys the principle of oil mist forming gradually so as to effectively restrain the generation of oil mist.
II. Product performance
1. Effectively improve flash point
2. Improve the surface tension of oil molecule
3. Increase the heat stability of cutting oil
4. Restrain the generation of oil mist in the cutting process through the above principle
III. Method of use
Directly add into the blended cutting oil
IV. Physical and chemical indicators
Density:0.88
PH value:5-6
Boiling point: Not boil at 200℃
Flashpoint: Add 5% SV-340 stainless steel cutting oil open flash point 168 degrees, add 10% SV-340 stainless steel cutting oil open flash point 175 degrees
Color: Colorless and transparent
V. Use ratio
3%-8% (adjust the use ratio as appropriate)