甲醇汽油助溶剂
Cosolvent of Methanol Gasoline
I. Product introduction:
For blending 90#, 93#, 95#, 97# and 98# methanol gasoline, the methanol is fully dissolved with gasoline to form even and stable solution to restrain the swelling of methanol for the corrosion of metal parts and rubber parts, enhance the low-temperature starting performance of methanol gasoline, eliminate high-temperature air resistance, and enhance the dynamic performance of climbing, accelerating and overload. The methanol gasoline prepared by the additive is characterized by high octane value, strong power, low cost, good safety performance and high exhaust purifying rate.
II. Main composition:
Polymeric alcohol, ether modifier, metal corrosion suppressant additive, rubber dissolution inhibitor, low-temperature ignitor, power fortifier, PH modifier and antioxidant antigum agent.
III. Method of use:
After the additive is added with the methanol in proportion and stirred and dispersed, it is added with gasoline, and it can be used after mixing evenly.
Safety:
It is combustible liquid with low flash point, and it shall be noticed with fire protection and ventilation as well as airtight preservation, and it is stored in the shady and dry warehouse.
IV. Physical indicators:
Appearance: Colorless and transparent
Density:0.8
PH value: 6-7
Freezing point: -16℃
Close flash point:lower than -30℃
V. Use ratio: 1%-5%
Refer to additive amount:
Methyl alcohol Gasoline 70% | ||||||
Add cosolvent% | 0% | 1% | 2% | 3% | 4% | 5% |
Turbidity point | -14℃ | -18℃ | -21℃ | -22℃ | -26℃ | -30℃ |