引擎燃烧室及三元触媒转换器除碳剂(泡沫式积碳清除剂)
Carbon removal agent of engine combustion chamber and three-way catalytic converter(foam type carbon deposit scavenging agent)
I. Product descriptions:
The product is composed of multiple complex active cleaning agents and polar solvent, excluding phosphate, which can be conducted with biodegration, and it contains metal ion sealing agent, so as to avoid excessive oxidation of metal surface for carbon removal from blackening or generating oxidized film.
II. Performance feature:
1. Dense foam and strong cleaning carbon removing force, and it can effectively eliminate the carbon deposit and residues in the combustion chamber.
2. Not hurt the piston ring, cylinder wall, nozzle, oxygen sensor, catalyst conversion.
3. Good corrosion resistance, it is a multi-functional carbon deposit removing agent of combustion chamber.
4. Improve the unstable idle speed, oil consumption, knocking, insufficient horsepower and other phenomenon.
III. Application method:
1. Shut down the engine at normal working temperature
2. Remove sparking plug.
3. Inject the product into the foam carbon remover.
4. Adjust the pressure of air compressor to be 3KG.
5. Use the spray gun to inject the foam into the machine from sparking plug port.
6. Dip for 20-40min.
7. Use strong vacuum gun to completely vacuum up the emulsifying free carbon layer liquid.
8. According to the elimination of carbon deposit, repeat the above carbon removal steps according to the actual condition.
9. Dry the combustion chamber by air gun.
10. Install back to sparking plug.
11. Start the vehicleto idle for 10-15min(from 1000rpm gradually to 3500rpm).
IV. Physical characteristics:
Density:1.09
PH:>14
Antifreeze point:Freeze under -2℃
Appearance:Faint yellow
Strong rust protection and carbon removal
V. Use ratio
350ml-400ml for one time
VI. Demonstration method:
Carbon removalagent / foam type carbon removing scavenging agent of engine combustion chamber and three-way catalytic convertor
Demonstration method:
Rust-proof demonstration:Put one cup of foam carbon deposit scavenging agent at room temperature, boil other cup at high temperature, and put the polished aluminum block in more than two solutions, and observe the bubbling and oxidation and corrosion condition of aluminum block.