自动变速箱止漏添加剂
Auto-transmission stop leakingadditive
I. Product function
a. Leakage stopping and leakage-proof function;
b. Good oxidation resistance and bubbling resistance property can effectively restrain carbon deposit and colloid;
c. Effectively treat the oil seal, recover the elasticity and sealing property of dry, hard and aged seal ring, oil seal and gasket, rapid stop the leakage occurred, and avoid insufficient lubrication of auto-transmission from burning.
II. Application method:
a. Determine sufficient oil mass in auto-transmission in normal working temperature;
b. Slowly pour the additive into the transmission and auto-transmission for mixing;
c. Immediately drive the vehicle or switch the vehicle to D shift so as to make the engine run at idle speed in situ for 5min;
e. Leakage condition can be improved or stopped after driving 300 miles or 5 driving days;
f. Check oil gauge, if the auto-transmission oil has stopped consuming, it is unnecessary to check the oil drip at bottom of vehicle, because the buffer of old auto-transmission is installed outside, it can immediately stop after dropping for several days again;
g. If the leakage cannot be stopped, it shall be dismantled for necessary inspection.
III. Physical characteristics:
Density:0.88
PH: 6
Antifreeze point:Turbid at -28℃
Pour point:-40℃
Flashpoint:Close at 62℃
Appearance:Colorlessclear liquid
IV. The recommended use ratio:
250-350 is used to treat5 litersauto-transmission oil
V. Anti-rust test
产品名称 Product name | 自动变速箱止漏添加剂 Auto-transmission stop leakingadditive |
Test condition | 80℃22h |
Test results | Steel, iron, copper, aluminum and galvanized sheet are all qualified |
VI. Demonstration method:
Demonstration of the rubber seal ring activation: The demonstration procedures:Take 50g prepared leakage stopping additive of auto-transmission, heat the additive to about 110 degrees, and stop heating.Then put the rubber ring to the additive after heating, activate for about 10min, take out rubber ring for comparation(compared with the inactivated rubber ring, the activated rubber ring is discovered to be soft and elastic;the rubber ring that has not been activated is relatively hard, without elasticity). Remarks:In order to shorten the demonstration time, soak with the leakage stopping agent stock solution of auto-transmission when demonstration, and use it after diluting with automatic transmission oil.
|