引擎内部排污添加剂
Blowdown additive inside the engine
I. Product function
1. Remove serious greasy dirt deposition inside the engine.
2. Improve the oil circuit circulation of engine oil
3. Prolong the service life of the engine.
4. Use the engine lubricating system for lubrication to reduce abrasion
II. Application method:
1. Determine sufficient engine oil mass
2. Before replacing the engine oil, firstly add engine oil for cleaning, mix additive and engine oil, start engine to run at low speed for at least 5min.
3. Notes: If the indicator light of engine oil pressure is on, the operator must immediately shut down the engine
4. Discharge engine oil and replace engine oil filter/
Notes: If the engine oil sludge discharged from engine is too much, please dismantle the oil pan for cleaning. Then pour into new engine oil.
III. Physical characteristics:
Density:0.87
PH: 6-7
Antifreeze point: -17℃
Flashpoint: <25℃
Color: Transparent yellow liquid
IV. The recommended use ratio:
250-300 ml mixes with 4-5 liters engine oil