陶瓷(氮化硼)抗磨添加剂
Ceramic boron nitride anti-wear additive
BN陶瓷抗磨节能润滑油添加剂
BN ceramic anti-wear energy-saving lubricating oil additive
I. Product descriptions
BN ceramic anti-wear energy-saving lubricating oil additive is one ceramic anti-wear energy-saving lubricating additive developed by high-purity boron nitride, and the slice platy structure can prevent direct contact between metal surfaces and effectively reduce the friction of machine.The BN ceramic anti-wear energy-saving lubricating oil additive can bear extreme high pressure, enhance heat dissipation function, bear higher temperature, increase economy of fuel, and prolong the service life of engine.
II. BN anti-wear energy-saving additive applies to the following lubricating oils:
1. Engine oil or oil additive | 2. Gear oil | 3. Penetrating oil |
4. Way lubricant | 5. The lubricating oil for the conveyor chain | 6. Cutting oil, grinding oil and crusher oil |
III. Physical and chemical properties
1) Concentrated type | 2) Enhanced cleaning type | 3) General type |
Density:1.2 | Density:1.12 | Density:1.21 |
PH:5-6 | PH:5-6 | PH:6-7 |
Antifreeze point: -1℃ | Antifreeze point: -7℃ | Antifreeze point: 0℃ |
Flashpoint: 172, overflow | Flashpoint: Close at 81℃ | Flashpoint: 170, overflow |
Appearance: White liquid | Appearance: White liquid | Appearance: White liquid |
IV. Use ratio
1. Lubricating oil for the engine:4-5%
2. Purpose of the general industrial lubricating oil:2-8%,
A. It is required to only add 3%-5% for the general anti-wear demand.B. If the higher anti-wear and energy saving demand needs to be reached, add the use amount according to the actual situation.C. Once the addition reaches more than 5%, the optimal anti-wear and energy saving property can be gotten, even the engine of the internal combustion enginecan conduct operation without oil, which means that after releasing the engine oil, it can be protected by the oil film strength on the parts inside the engine and operated continuously for a long time.
V. Anti-rust test:
Copper, aluminum block, iron, steel and galvanized sheet are not corroded;Copper is 1b Rust protection (100℃3h)
IV. Test report
QR/RHY02·0151-2009
Report No.: 10031105
Test Results | |||
样品名称 Sample Name | Detection Item | Test Results | Test Basis |
发动机引擎抗磨剂 Anti-wear agent of engine | PB value through bearing capacity measurement of four-ball machine.N | 1117 | GB/T3142 |
PDvalue through bearing capacity measurement of four-ball machine.N | >6076 | GB/T3142 | |
Long-term wear value through anti-wear property measurement of four-ball machine.mm | 0.56 | SH/T0189 |