二硫化钼抗磨添加剂
Molybdenum disulfide anti-wear additive
二硫化钼抗磨节能润滑油添加剂
Molybdenum disulfide ceramic anti-wear and energy-saving lubricating oil additive
I. Product descriptions
Molybdenum disulfide anti-wear and energy-saving lubricating oil additive is a product produced by high-purity compound molybdenum (or called Second-generation molybdenum) after processing special handling, can suspend in the lubricating oil in colloid homogenate status and can significantly improve anti-wear and anti-pressure character of different lubricating oils.
II. Molybdenum disulfideanti-wear and energy-saving additive applies to the following types of oil grease and lubricating oil:
1. Engine oil | 2. Gear oil | 3. Permeating oil | 4. The industrial lubricating oil | ||
5. The lubricating oil for the conveyor belt and the conveyor chain | 6. All kinds of grease and butter | 7. Hydraulic oil | |||
8. All kinds of special lubricating oil | 9. Cutting oil | ||||
III. Physical and chemical properties
1) Concentrated type | 2) Enhanced cleaning type | 3) General type |
Density: 1.2 | Density: 1.11 | Density: 1.20 |
PH: 7-8 | PH: 6-7 | PH: 6-7 |
Antifreeze point: -9℃ | Antifreeze point: -9℃ | Antifreeze point: 1℃ |
Flashpoint: 169, overflow | Flashpoint: Open at 97℃ | Flashpoint: 171, overflow |
Appearance: Black liquid | Appearance: Blacsk liquid |
Appearance: Black liquid |
IV. Use ratio
1. Lubricating oil for the engine: 4-5%
2. Purpose of the general industrial lubricating oil: 2%-8%, determined according the anti-wear performance requirement.
A. It is required to only add 3%-5% for the general anti-wear use demand
B. If the higher anti-wear and energy saving demand needs to be reached, add the use amount according to the actual situation.
C. Once the addition reaches more than 5%, the optimal anti-wear and energy saving property can be gotten, even the engine of the internal combustioncan conduct operation without oil, which means that after releasing the engine oil, it can be protected by the oil film strength on the parts inside the engine and operated continuously for a long time.
V. Anti-rust test:
Copper, aluminum block, iron, steel and galvanized sheet are not corroded. Copper is 1b. Rust protection (100℃3h)