柴油除水添加剂
Diesel water removal additive
I. Brief introduction of the product:
Aiming at the issue that it is difficult to take away water from the oil product, especially the water removal from diesel, this additive is characterized by high efficiency and simple use. Meanwhile, it has powerful water soluble property, is able to dissolve water in the fuel tank and the fuel system and blend in the fuel oil to burn together with oil. This product will not harm quality of the fuel oil and its use is safe without side effects. Use of this product for a long period will prolong the service life of the fuel injection system.
II. Product function:
(1) Thoroughly remove water from diessel.
(2) Prevent metal corrosion
(3) Maintain the inside of the fuel system clean.
III. Physical characteristics:
Specific gravity: 0.94
PH: 6-7
Antifreeze point: 1℃
Appearance: Transparent yellow liquid
IV. Anti-rust data and demonstration method:
产品名称 Product name | 柴油除水添加剂 Diesel water removal additive |
Test condition | 80℃16h |
Test results | Copper and aluminum are qualified; Copper becomes dark slightly; Iron and galvanized sheet become dark |
Demonstration method:
Diesel | 20g | 20g | 20g | 30g | 20g | 30g | 50g |
Water | 0.5g | 1.5g | 2.0g | 0.9g | 1.0g | 1.5g | 2.5g |
Additives | 1.9g | 9gnot clear
| 13gnot clear
| 2.7g | 2.4g | 3.1g | 6.1g |
Water % in diesel | 2.5% | 7.5% | 10% | 3% | 5% | 5% | 5% |
Additive % in diesel | 9.5% | 9% | 12% | 10.3% | 12.2% | ||
Water: Additives | 1:3.8 | 1:3 | 1:2.4 | 1:2.1 | 1:2.44 | ||
Remarks: In this formula, when water content in diesel is ≤5%, the water removal test can be demonstrated and the solution is clear. Moreover, quantity of the additive is 2-4 times of that of water during demonstration. When water content in diesel is >5%, the solution is not clear when the additive is put in. The additive mixes with diesel well. | |||||||
Demonstration method: Put 20g diesel in the beaker, then add water whose content is 2.5% and 5% in diesel respectively and then slowly add the additive until the solution is clear. Put 30g diesel in the beaker, then add water whose content is 3% and 5% in diesel respectively and then slowly add the additive until the solution is clear. |