汽油引擎节气门、气门泡沫式积碳清洁剂(水性)
Gasoline engine throttle valve foam-typecarbon depositioncleaning agent(waterborne)
I. Product function:
本产品可有效清除节气门进气道和进气阀的积碳,疏通进气道。
This product is able to effectively remove the carbon deposition in the throttle, the air inlet and the inlet valve to dredge the air inlet.
II. Product function:
Remove colloid and carbon deposition in the throttle and the air inlet, dredge the air inlet, remove carbon deposition on the throttle, and restore the sealing property of the cylinder to avoid leakage of the combustible mixture and ensure the normal air-fuel ratio during the engine working, which can realize thorough combustion, reduce toxic gas emission and improve the fuel availability.
III. Action principle of product:
The effective ingredient in the cleaning agent is able to dissolve the colloidandsediment in the throttle valve,air inlet and inlet valve and dissolve and take away the harmful ingredient in the system. The effective ingredient in cleaning agent will loose the position that has been formed around the air inlet, which shall be taken away be the inlet air and exhaust to realize depositionremoval.
IV. Physical characteristics:
Specific gravity: 0.97
PH: 11-12
Antifreeze point: -16℃, ice flower
Flashpoint: <25℃
Appearance: Colorless clear liquid
V. Use ratio and method
200-300ml is used for a vehicle Be able to absorb or spray through the intake manifold
VI. Notes:
:
After this additive has been added, please note the following matters:
<1> Start the engine and smash the accelerator pedal for several times at the site in order to discharge carbon deposition which has been soften and loose using the discharge pressure to avoid engine idling and unsmooth operation.
<2> Once engine idling and unsmooth operation occurs, it may be due to loose valve closure, which may be resulted from the carbon deposition being stuck on the valve seat. The treatment methods are as follows:
1. Start the engine at the site, keep the rotation speed of 3,000r/m for 0.5 min, then return to the normal state and repeat the process until the engine operation is normal.
2. Direct driving for a period is also possible until the engine idling operation is normal.