重油融水添加剂
Heavy Oil Melting Additive
I. Product descriptions
Heavy oil melting additive is a liquid substance compounded after chemical reaction, and it has special surface activity, extremely strong hydrophilia and rapid dissolution in the water, and the water and heavy oil can be instantly emulsified through simple emulsifying technology or special equipment.
The melting heavy oil using heavy oil melting additive specially supplies burning oil unit, which is environmental and stable, and it can save about 20% per ton through using the additive. For a large number of consumer enterprises, its saving benefit is very considerable.The additive is widely applied in diesel vehicle, ceramics factory, metallurgy and building materials, machining, light industry, electricity, steamer, power station, glass factory, industrial furnace, boiler and other industries.
II. Method of use
The adding proportion of the additive: 100KG heavy oil, 20KG water, 1-3% additive
Specific application methods:
A. Draw into the heavy oil in the reaction tank in ratio,
B. Hold temperature at 60-80 degrees,
C. Start stirring
D. Heat the water in ratio to 60-80 degrees,
E. Put additive in ratio and fully and evenly mix,
F. Draw into reaction tank
G. Stir for 30min
H. It can be used until the oil, water and additive are blended
I. In the using process of emulsified heavy oil,
J. The temperature shall be held at 60-80 degrees until it is used up.
For the user with special equipment, it is easier for high-speed shearing emulsifying machine: Add additive in the heavy oil at 70-80 degrees, under the effect of about 4000 YPM high-speed shearing emulsifying machine, add water to emulsify into environmental-protection and energy-saving oil.
III. Physical and chemical indicators
Appearance: faint yellow
Density:0.89
PH: 8-9
Pour point:-18℃ Turbidity point: -13℃
Flashpoint: <25℃
IV. Use ratio
1%-3%