油切清洁型抗磨添加剂
Powerful clean anti-wear additive
I. Brief introduction of the product:
With unique compound design, this product may powerfully clean the grease inside the engine, significantly improve horsepower of the engine, efficiently reduce workload of the engine oil, and prolong the service life.
II. Product function:
1. Activate the engine oil to dredge dead angle at the end of the oil passage
2 Clean up sedimentation of the grease and reduce the friction coefficient of the engine, in order to minimize the friction during starting.
3. Eliminate noise and knocking of the engine to prolong its service life.
4. Intensively improve explosion capacity of the cylinder.
5. Have a superior starting performance at low temperature.
6. Reduce the exhaust emission and oil consumption.
7. Prevent the engine and recover the horsepower.
III. Application method:
In cold start status, switch off the engine after starting for 30s, add this product into the oil tank and then drive for 10min in high speed in low gear position to facilitate full, rapid decomposition of the grease.
IV. Physical indicators:
Density:1.10
PH: >14
Pour point:-38℃
Color: Transparent light wine red liquid
V. Use ratio:
30g product can treat 4L engine oil.(For gasoline and diesel oil)
VI. Data of the anti-wear test:
Anti-wear data for the powerful anti-wear additive: Add 0.8% product into SG 15W40 engine oil 16weights Clear Add 5% product into SG 15W40 engine oil 12 weights |