吸附型抗磨添加剂(可做无油抗磨演示)
Adsorption type anti-wearadditive(the anti-wear demonstration without oil is available)
I. Product introduction
This product is designed for improving oil film strength and adsorption of the lubricating oil, and the general weight anti-wear test machine can carry out the dry grinding demonstration without oil, replacing the driving test without engine oil for the engine.
II. Product characteristics
1. Prolong the service life of the engine.
2. Reduce fuel consumption
3. Increase the horsepower and reduce the engine noise
4. Effectively enhance adsorption of the oil film and reduce wear of machine parts
5. The extreme pressure anti-wear dry film test can be carried out
III. Physical and chemical indicators
Appearance: Light yellow liquid
Density:0.99
PH value: 5-6
Antifreeze: Turbidity point at -5℃ Pour point at -25℃
Flashpoint: 160℃ (Open)
IV. Demonstration method
Rust protection | 120℃3 h |
Test results | The copper is 1B, and aluminum and steel are qualified |
Anti-wear | Remove the oil cup after adding 10 weights in the additive, and execute dry grinding for 9 min and 21s; add 5% product into 230N, add 10 weights in turn and then execute dry grinding for 2 min and 28s after removing the oil cup. |
Add 5% engine oil | Not stuck with 18 weights |
Add 5% product into 230N | Not stuck with 18 weights |