I. Anti-wear additives (For Lubricants)
1. 陶瓷(氮化硼)抗磨添加剂
Ceramic (boron nitride) anti-wear additive
M.O.F-BN陶瓷抗磨节能润滑油添加剂原料
Raw materials of M.O.F-ceramic (BN) anti-wear and energy-saving lubricatingoil additive
I. Product descriptions
M.O.F. BN-55 is one ceramic anti-wear and energy-saving lubricating additive developed by high-purity boron nitride, and the slice platy structure can prevent direct contact between metal surfaces so as to effectively reduce the friction of machine. The M.O.F. BN-55 can bear extreme high pressure, enhance heat dissipation function, bear higher temperature, increase economy of fuel, and prolong the service life of engine.
II. The M.O.F-BN-55 anti-wear and energy-saving additive is suitable for the following lubricating oils:
1. Engine oil or oil additive | 2. Gear oil | 3. Permeating oil |
4. Way lubricant | 5. The lubricating oil for the conveyor chain | 6. Cutting oil, grinding oil and crusher oil |
III. Physical and chemical properties
1) Ceramic paste | 2) Ceramic olein |
Density: None | Density: None |
PH: 6 | PH: 6 |
Flashpoint: 180, overflow | Flashpoint: 172, overflow |
Appearance: White grease | Appearance: White grease |
IV. Use ratio
1. Lubricating oil for the engine: 2-5% 2. Purpose of the general industrial lubricating oil: 2-8%
A. It is required to only add 2%-5% for the general anti-wear ues demand. B. If the higher anti-wear and energy-saving demand needs to be reached, add the use amount according to the actual situation. C. Once the addition amount reaches more than 5%, the optimal anti-wear and energy-saving property can be gotten, even the engine of the internal combustion can conduct operation without oil, which means that after releasing the engine oil, it can be protected by the oil film strength on the parts inside the engine and operated continuously for a long time.
V. Anti-rust test: (5% mixing with Harbin AviationSF 15W-40 engine oil test)
Copper, aluminum block, iron, steel and galvanized sheet are all qualified Copper is 1b. (100℃3h)
V. Test report
|
National Petroleum Product Quality Supervision and Inspection Center (Guangdong)
Petroleum Product Quality Test Center, Huizhou City, Guangdong Province
Inspection Report
No. 20118521 Page 2 of 2
Serial No. | Inspection Item | Inspection Basis | Quality Indicators | Test Results | Individual Conclusions |
1 | N (KGF) Four-ball machine test N (KGF) | GB/T 3142-1982(1990) | |||
PB value | -- | 647(66) | -- | ||
PD value | -- | 1962(200) | -- | ||
ZMZ value | -- | 337(34.4) | -- | ||
Remarks | Add 5% (m/m) into the base oil with 500SN for measurement. |
Audited by: Hu Jiangyong Mainly tested by: XXX