铁氟龙(聚四氟乙烯)抗磨添加剂
Teflon(PTFE) anti-wear additive
铁氟龙抗磨节能添加剂
Teflon anti-wear energy-saving additive
I. Product descriptions
Teflon anti-wear energy-saving additive is one compound additive through high condensation and colloid treatment, and it can form colloid homogeneity to suspend the lubricating oil, and has more superior temperature stability compared to the common Teflon additive.Due to its extremely powerful anti-wear property, more energy can be saved; add the bearing load to reach continuous stable and smooth operation of machinery and engine and prolong the service life.
II. PTFE anti-wear energy-saving additive applies to the following types of oil grease and lubricating oil:
1. Gear oil | 2. Engine oil | 3 Penetrating oil | 4. The industrial lubricating oil |
5. The lubricating oil for the conveyor belt and the conveyor chain | 6. Cutting oil | 7. All kinds of grease and butter | 8. Hydraulic oil |
III. Physical and chemical properties
1) Concentrated type | 2) Enhanced cleaning type | 3) General type |
Density:1.19 | Density:1.11 | Density:1.2 |
PH: 6-7 | PH:6-7 | PH: 6-7 |
Antifreeze point: Hardly flow at -2℃ | Antifreeze point: Hardly flow at -8℃ | Antifreeze point:Not flow at 0℃ |
Flashpoint: 170, overflow | Flashpoint: Close at 97℃ | Flashpoint: 173, overflow |
Appearance: White liquid | Appearance: White liquid | Appearance: White liquid |
IV. Use ratio
1. Lubricating oil for the engine:4-5%, for gasoline engine, diesel engine, internal combustion engine of small ship, large generating unit, internal combustion engine of train, large gas turbine, various piston compressors,gear case and bearing.This product has simple package and is convenient to carry. It has no requirement to change the original lubricating oil used by the equipment, just adding simply.
2. Functional lubricating oil:All kinds of lubricating oil for gasoline engines, diesel engines, gas engines, piston compressors and gear boxes.This product is designed in combination of the composite nanometer teflon lubricating materialsand the lubricating oil.
A. It is only added with 3%-5% under general anti-wear use demand
B. In case of reaching more superior anti-wear energy-saving demand, the usage amount can be added according to the actual demand.
Once the addition reaches more than 5%, the optimal anti-wear and energy saving property can be gotten, even the engine of the internal combustion can conduct operation without oil, which means that after releasing the engine oil, it can be protected by the oil film strength on the parts inside the engine and operated continuously for a long time.
V. Anti-rust test:
Copper, aluminum block, iron, steel and galvanized sheet are not corroded. Copper is 1b. Rust protection (100℃3h)